3.
Turn the gauge downward positioning the gauge rod in contact with the spindle sleeve
(P.2, Position 2)
as shown in the
figure and press
CALIBRATION COMPLETE
▪
Return the gauge to
home
position.
▪
The wheel balancer is ready for operation.
In case of errors or malfunctions, the indication of the same step [P.1] or [P2], always reappears on the display. Move the
gauge back into
HOME
position and repeat the calibration operation as described above; if the error persists, contact Technical
Service.
If erroneously accessing the diameter gauge calibration function, press
to cancel it.
ADHESIVE WEIGHT WIDTH
Indicates the average width of the adhesive weights on the market.
Change ONLY if the width of the adhesive weights used for unbalance correction /- 3 mm with respect to
that shown on the display (default=19mm).
Important: Always read and follow the instructions.
20
•
Gauge
Rod touches the bottom
of the Spindle Sleeve here
