16 •
Important: Always read and follow the instructions.
Setup
MENU ACCESS DIAGRAM
This is used to
personalize
some balancer functions and to perform calibrations.
To access this section, press the button.
diameter mm/inch
width mm/inch
SELF-DIAGNOSTICS
BALANCING MACHINE
CALIBRATION
RETURN TO MEASUREMENT SCREEN
Calibration of automatic RIM DISTANCE gauge
Calibration of automatic DIAMETER gauge
UNBALANCE OPTIMISATION
WHEEL DIMENSIONS SETTING
g/oz button on the panel
ON/OFF (if foreseen)
screen saver operating
time in minutes
wheel locking
ON/OFF (
if foreseen)
adhesive weight width
tolerance on the correction
planes
start from
guard closing ON/OFF
approximates
1-5g 0.1-0.25oz
beep signal
ON/OFF
unbalance unit
of measure g/oz
Default is OFF
Note
: After leaving the Set Up Menu Functions, you will need to lower the hood
2x
to start your next balance check.
