4
1 Please observe the following
1.4 For Your Safety
Request the technical data sheet and the safety data sheet for the LOCTITE
®
product
used at www.loctite.com.
FOLLOW UNCONDITIONALLY THE INSTRUCTIONS OF THESE DATA SHEETS!
WARNING
!
It is the responsibility of the user to ensure that all devices being driven by the LED Line
Controller are set-up in a safe manner.
The manufacturer is in no way responsible for injuries or damage to persons or property
resulting from devices being driven by the LED Line Controller.
For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.
Removing, bypassing or putting out of operation of the safety devices can result in
radiation damage to persons and damage to the unit and is therefore prohibited!
Do not look directly at LED-UV light, or at LED-UV light reflected in a mirror or other reflective
surface. Doing so could cause eye damage.
Install the LED Line Array in a way that humans are not exposed to LED-UV light.
Exposure could injure skin or eyes.
If there is a risk of the LED-UV light being exposed to UV reflective light, place the product
inside a cover with proper reflectance and heat characteristics to block that reflected light.
When operating the controller, set up the system so that the path of the LED-UV light is not
at eye level.
It is strongly recommended to place a protective barrier around the product so that people
cannot approach it while it is operating.
Wear protective UV glasses and other protective clothing during operation.
Never operate this product in a manner not described in this manual. Doing so risks
exposure to LED-UV light.
Damage to the power cord or the housing can result in contact with live electrical parts.
Check the power cord and the unit before each use. If the power cord or the unit is
damaged, do not operate! Replace a damaged power cord with a new one.
The unit may be opened and repaired only by authorized service personal.
