Hendi 232717, Instruction Manual

Page: 12 / 164

12
EN
3.7. Functioning description
The control devices are designed and manufac-
tured so as much sure and reliable and resistant
to the service normal stresses, to the foreseeable
strains and to the external agents. Besides they are clearly visible, locatable and marked from a
suitable marking. Here follow the main control
devices are showed:
TYPE / COLOR REFERENCE / DESCRIPTION
button / black “0” / button for the machine stop control
button / white “I” / button for the machine start control
Starting
The machine starting is possible only with a vol-
untary action on the control device foreseen for this aim: white button “I” for the machine starting
control.
Stop
For the stop control push the black button “0”. In
case of momentary or extended stop, before to get
in function the machine, all food products must be removed within the machine: follow the indications
relative to the grinding group disassembly.
Functioning safety
If the machine is under stress, or is submitted to
too long functioning times or submitted at over-
loaded, the same stops immediately for the ther- mal protection functioning. In this case wait that
it is completely cooled before proceeding to the
starting function.
Voltage lacking
In case of electric feeding breaking or if the ma-
chine is disconnected from the electric net, this
last one will be able to be restarted only following the starting function, after the electric feeding
back or the reconnection to the electric net.
3.8. Controls and verifications before starting
VERIFICATION / CONTROL BEFORE THE STARTING MODALITY AND CHECKS
Check that:
Extraneous objects aren’t on the machine, inside the
hopper, inside the machine neck
Sight control of the indicated parts, to check of objects
or extraneous bodies lacking as for example different
tools, clothes, etc… and that there isn’t however the food
product.
In case of presence, provide with their removal.
Check the cleaning:
• of the machine neck internal parts and of the
grinding group
• of the pusher
• of the machine external surface
All indicated parts surfaces, before the machine use
must be checked visually to verify their cleaning.
For the sight check of the grinding group internal parts,
provide with its disassembly.
In case of molds presence or other type of dirtiness, pro-
vide with the cleaning procedure in accordance with the
chapter 5 indications