Initial Configuration
The configuration is set via the potentiometer P1, the DIP switch and the reset button. The function of these
elements is described in the following section.
Changes to configuration will only take effect once the configuration mode has been selected, modified and
then exited.
A
– Configuration of DIP switches -
Set desired parameters, while power is off.
B
– Potentiometer Detail – Automatic closing delay time
To prolong automatic closing delay time
– Turn potentiometer Clockwise
To reduce the automatic closing delay time
– Turn potentiometer Anti clockwise
NOTICE: Potentiometer have a right and left stop point
– which must not be overtightened. Adjust
potentiometer slightly with an appropriate tool. Damage to control device may result in malfunction.
Quick overview
– Wiring wall mounted socket
For detailed operation and programming instructions please consult the Evolve Motor and Wiring Fitting Instructions
supplied
