Manufacturers Declaration of Incorporation
Manufacturer:
PC Henderson Ltd
Durham road
Bowburn
Durham
DH6 5EN
Telephone:
0191 3777345
Fax:
0191 3773166
Hereby declares that the electromechanical automatic door operating
system.
Evolve
Evolve Glass
Evolve SIM
Are intended to be incorporated into machinery or to be assembled
with other machinery to constitute machinery covered by directive
2006/42/EC
It is in conformity with the provisions of the following directives.
Electromagnetic Directive
2004/108/EC
Low Voltage Directive
2006/95/EC
The technical file is maintained at:
PC Henderson Ltd
Durham road
Bowburn
Durham
DH6 5EN
The authorized representative located within the community is
Fergus Pickard
Product Development Director
PC Henderson Ltd
Durham Road
Bowburn
Durham
DH6 5EN
The above named undertakes to transmit in response to a reasoned
request by national authorities, relevant information on the partly
completed machinery.
Fergus Pickard, Product Development Director
Bowburn, Durham
19/10/17
Avoid operating in the proximity of moving mechanical parts
Do not entre the field of danger of the motorised door while in
motion.
Do not obstruct the motion of the motorised door as this may
cause a situation of danger.
Do not lean against of hang on the barrier when it is moving.
Do not allow children to play or stay within the field of action of
the motorised door.
Keep remote control or any other control devices out of reach
of children, In order to avoid possible involuntary activation of
the motorised door.
In the case of breakdown or malfunction of the product,
disconnect form the mains, do not attempt to repair or
intervene directly & contact only qualified personnel.
Failure to comply with the above may create a situation of
danger.
All cleaning maintenance or repair work must be carried out by
qualified personnel.
In order to guarantee that the system works efficiently and
correctly it is indispensable to comply with the manufacturers
indications thus having a periodic maintenance of motorised
door carrier out by qualified personnel. In particular regular
checks are recommended on order to verify that the safety
devices are operating correctly.
All installation, maintained and repair work must be
documented and made available to the end user
Operating Instructions for Evolve Automation Sliding Door System
Release Operation
In the event of malfunction or these is no mains power, move the door manually.
General Safety Precautions
The following precautions are an integral & essential part of the product and must be supplied to the end user. Read them carefully
as they contain important indications for the safe installation, use and maintenance. These instructions must be kept and forwarded
to all possible future users of the system. This product must be used only for that which it has been expressly designed; any other
use is to be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for possible damage caused by improper erroneous or unreasonable use.
Installer
Installer training available upon request, please note this attracts a fee.
