Hemisphere GPS LiteStar II Air, User Manual

Page: 58 / 135

LiteStar II Air User Guide
49
S
AVING A
J
OB
LiteStar II Air saves job data associated with each job in the
system log, if you have purchased the logging version. Simply
review the LiteStar II Air log in MapStar, or other mapping
application, to review your work.
To save an incomplete job, you can set a mark in LiteStar II Air.
LiteStar II Air automatically stores job information as a mark -
including your swath number, swath width, pattern, direction,
acreage, and spray information - at the last point sprayed on your
last job flown before turning off LiteStar II Air.
This mark will be overwritten with each new job flown.
If you wish to save a job permanently, you can set up to three marks in
addition to the last swath mark automatically saved by the system.
See “Chapter 6: Using Navigation Marks & Waypoints” for more
information.
Tip! Make sure to save the mark as type, “Save Last Swath” to
store job information. See “Chapter 5: Flying a Pattern” for more
information on setting, recalling, and deleting marks.
LiteStar II Air.book Page 49 Thursday, June 7, 2007 4:02 PM