LiteStar II Air User Guide
23
3. Use the length taken in Step 2 and tie-off excess cable length if
required.
4. Connect one end of the cable to the Lightbar.
Tip! To connect the cable: plug the cable into the outlet and
turn the ring on the plug connector to tighten.
5. Run the cable from the Lightbar to the controller.
6. Connect the other end of the cable to the outlet on the
controller labeled “Lightbar.”
To install the power cable:
1. Find the cable labeled “Power: Input.”
2. Connect the Power/Spray cable to the controller.
Tip! To connect the cable: plug the cable into the outlet and
turn the ring on the plug connector to tighten.
WARNING!
Finger-tighten the cable connectors. Do not use any tools.
Note: The Power cable and Spray cable are combined
together into one cable at the end that plugs into the
controller. At the opposite end, they are two separate
cables.
WARNING!
Finger-tighten the cable connectors. Do not use any tools.
LiteStar II Air.book Page 23 Thursday, June 7, 2007 4:02 PM
Summary of Contents for LiteStar II Air
