Hemisphere GPS LiteStar II Air, User Manual

Page: 33 / 135

24
2: Installing LiteStar II Air
3. Connect the other end of the Power cable to the power source.
4. Select either the Cigarette Lighter Adapter cable or the Battery
Terminal cable (recommended).
5. Connect the selected cable to the main Power cable. Plug the
end of the selected cable into the connector at the end of the
Power cable.
6. Connect the other end of the cable to the power source. If
hardwiring to your battery, attach the ring terminal connectors
to the battery posts (the Battery Terminal cable connectors are
color-coded red for positive and black for negative). Secure the
connectors by tightening the wingnuts on the battery.
To connect the spray cable (part of the Power cable):
1. Find the cable labeled, “Spray ON/OFF”
Reminder! The Spray cable is attached to the Power cable at
the end of the cable that plugs into the controller. So, the
Spray cable should already be plugged into the controller.
2. Measure the distance between the vehicle spray system and
the location of the controller inside the cab.
WARNING!
The power source must be able to supply uninterrupted
power between 10-30 volts DC. Your system must be well-
grounded.
Note: The Power cable can either be plugged into a
Cigarette Lighter Adapter cable or hardwired to your
battery. Use the cables labeled “054-0034” (Cigarette
Lighter Adapter) or “054-0043” (Battery Terminal) to
connect the main Power cable to the power source.
Note: The cable is designed to withstand all types of
conditions and can be installed inside or outside the vehicle.
LiteStar II Air.book Page 24 Thursday, June 7, 2007 4:02 PM