Hema HN7 User Manual Download Page 21

Page: 21 / 128

M A I N M E N U

Hema HN7 User Manual

Speaker Indicator

Speaker Inactive (Muted)

Speaker Active

The Speaker Indicator displays the internal speaker status.

Note: The HN7 speaker will be muted if the FM Function is active (See

information on the FM page of this user guide).

Bluetooth Indicator

Bluetooth Inactive

Bluetooth Active

The Bluetooth indicator displays the status of the Bluetooth function. You

can tap this icon to take you directly to the Bluetooth screen.

GPS Indicator

GPS Inactive (Searching for signal)

GPS Active

The GPS Indicator displays the status of GPS Satellite Reception. You can

tap this icon to take you directly to the GPS Information screen.

Navigation Applications

There are TWO separate navigation applications installed on your Hema

HN7 NAVIGATOR:

Street - iGO Primo 2.4

iGO Primo 2.4 is an advanced street navigation program utilising

vector mapping and auto-routing. This application is ideal for use

around populated areas.

4WD – OziExplorer (Ezi Ozi-3)

OziExplorer displays raster maps with your position and various

other items of information overlaid on the maps screens. The

primary purpose of OziExplorer is to provide navigation in off-road

areas. The application shows "Where you are" and "How you got

there".

System Date & Time

The current System Date and Time are displayed in 24 hour format on

the orange strip at the bottom of the screen.

HN7 User Manual_v1.3.indd 21

20/11/14 2:36 PM

Summary of Contents for HN7

































































































































Search results

Summary of Contents for HN7

Reviews:

Hema HN7, User Manual, Page: 21 / 128

Search results

Summary of Contents for HN7

Reviews: