manualshive.com logo in svg

Hema HN7, User Manual, Page: 12 / 128

Share
Download
Hema HN7 User Manual Download Page 12

10

G E T T I N G   S T A R T E D

G E T T I N G   S T A R T E D

Hema HN7 User Manual 

10 

Inserting & Removing MicroSD cards 

The Hema HN7 NAVIGATOR comes with a pre-installed 8GB MicroSD card. 

To remove the MicroSD card from your HN7: 

1.

 

Turn the NAVIGATOR so that the front of the device is visible. 

2.

 

Locate the MicroSD card slot on the side of the device.  

3.

 

Using your fingernail or the stylus, depress the card further into the slot 

and slowly release. 

4.

 

The card should spring out of the slot far enough for removal. 

NOTE 

Avoid letting the MicroSD card eject quickly out of the slot. 

To re-insert the MicroSD card  

1.

 

Turn the NAVIGATOR so that the front of the device is facing you. 

2.

 

Locate the MicroSD card slot

 on the left side of the device. 

3.

 

Position the card with printed side facing away from you as per 

illustration.  

4.

 

Slide the card gently into the slot until it clicks into place. 

 

NOTE 
When re-inserting the MicroSD card, ensure it is centred in the card 

slot. Do not push in on an angle and avoid forcing the card into the slot. 

 

 

HN7 User Manual_v1.3.indd   12

20/11/14   2:36 PM

Summary of Contents for HN7

































































































































Reviews:

No comments