Helvar
| Data is subject to change without notice.
www.helvar.com
5
3. Do the following to adjust the mounting clip latch to the
length that is appropriate for the required mounting
orientation:
a. Press the upper part of the mounting clip on both
sides.
2. Screw the mounting plate to the unit using the appropriate
holes. For details, refer to the preceding table.
b. Push the mounting clip latch forwards to unlock it.
c. Slide the latch upwards or downwards to the length
that is appropriate for your mounting orientation. For
details, refer to the table on page 4.
CLICK!
d. Push the latch backwards to lock it.
