11
Helvar
| Data is subject to change without notice.
Unit details
Submenu items
Options
Details (read-only)
Serial number and Firmware version
Mode
Mode, power and data information
If DALI power is on, a tick appears next to the DALI power field.
DALI or SDIM/DMX shows the last detected mode when the module was reset.
Relay contacts
(read-only)
Heatsink and internal temperatures
User mode (all read-
only);
For message details, refer to ‘Error messages’ on page 15.
Recall scene
Recall a scene previously stored (temporarily if connected to a Helvar router system).
Scenes are sets of lighting levels and can make use of any combination of channels.
This option is always available, even when password protection is applied to other options.
Range: Scene 1–16
Save as scene
The levels that are currently active for all channels are applied to this scene. You can recall stored scenes in the ‘Recall
Scene’ menu (see above).
Range: Scene 1–16
Default scenes
Default lighting scenes can be applied to the output channels, i.e. scene 1 = 100 %, scene 2 = 75 %, scene 3 = 50 %, and
scene 4 = 25 %.
Note:
Lighting levels are NOT changed automatically once you apply default scenes. However, once you recall a scene,
lighting is set to the levels for that scene.
Groups
Assign relay and ballast output pairs to DALI groups. Any relay/output pair can be assigned to any group.
Options:
Group:
1–16
Relay and output:
1–8
Options:
✓ (Up button);
x
(Down button).
(Default:
xxxxxxxx)
