Helmholz Modem 56k small, Operating Manual

Page: 72 / 95

72 Helmholz Modem 56k small/Modem 56k USB small
Register Function Units Range Default
S30 Time period until hang up due to silence 10 s 0-255 0
S31* General settings - C2h (194)
S36* Reset of error logs - 135
S38 Time period until forced hang up s 0-255 20
S39* Flow control - 3
S40* General settings - 104
S41* General settings - 195
S46* V.42bis Data Compression - 138
S48* V42bis Connection setup protocol - 7
S86 Error event code - Read-only
S91* Transmit Level - 0-15 9
S95* Result code - 0
10.2 Description S Registry
Note:
Registries marked with *) are stored in the user defaults with the command
AT&W
-
Befehl.
S0* Number of ringing tones until automatically going off-hook
Number of rings until the modem goes off-hook
For S0=0 the modem will not go off-hook when a call comes in. The value of S0 can be
between 0 and 5.
S1 Ringing tone counter
Counter for call ringing. S1 is read-only. S1 will be reset to zero, when the modem
answers a call.
S2* Escape
Escape character which causes a switch from data mode to online command input
mode. Values larger than 127 will result in no ESC character being recognized.
S3 Return
Carriage Return Character (CR).