Helm Trend Loadgard TLG2300, Operating Instructions Manual

Page: 17 / 46

OPERATING INSTRUCTIONS TREND SERIES
JOB DATA CONTROL (JDC)
The JED feature provides memory storage of up to 100 different job numbers per LOADGARD. The
following data is stored for each job:
•
Capacity alarm settings
•
Tolerance alarm settings
•
Target (optimum) load values
INITIAL STORING OF CAPACITY AND TOLERANCE SETTINGS
1. Put JDC switch in manual mode.
2. Set selector switches to desired job
number (0-99).
3. Check capacity and tolerance settings;
readjust if necessary.
4. Press STORE button
5. Green LED on JDC panel will flash, indicating data is being stored.
6. To over-ride and store new settings, follow steps 1-5.
STORING OF TARGET LOADS
1. Put JDC switch in Auto mode.
2. Turn front panel keyswitch to monitor parts mode.
3. TARGET values are automatically stored during initial setup when front panel keyswitch is
turned to Monitor Parts mode. The TARGET value is current peak tonnage as displayed on
digital meters.
4. To over-ride and store new TARGET values, put JDC switch in Auto Mode and press store
button. Peak loads as displayed on the digital meters will be stored as new target loads.
5. Green LED will flash, indicating data is being stored.
Capacity and Tolerance settings are stored in MANUAL mode. Target loads are stored in AUTO
mode.
13