Appendix B
Items needed to map into program:
Ladder
Programming
1.) Press in motion bit
a.) If you are using Helm HR-1101 resolver for position input and
are using our sample ladder:
Rung 2:0
| helm's | press in |
| press in | motion bit |
| motion bit| |
| N12:0 N10:21 |
|----] [---------------------------------------------------------------( )-----|
| 4 0 |
b.) If you have your own press in motion bit
Rung 2:1
| customer | press in |
| press in | motion bit |
| motion bit| |
| N7:0 N10:21 |
|----] [---------------------------------------------------------------( )-----|
| 0 0 |
2.) Resolver or a rotary cam or prox probe
a.) If using resolver, map the angle value into N153:0
Rung 2:3
SETS UP CAM WINDOW FOR TONNAGE MODULE
| PANELVIEW |
| AND CH'S |
| 1&2 MODULE |
| CAM CYCLE |
| BIT |
| +LIM---------------+ N10:21 |
|-+LIMIT TEST +-------------------------------------------------------------------------------------------------( )-----|
| |Low Lim 600| 0 |
| | | |
| |Test N153:0| |
| | 0| |
| |High Lim 2830| |
| | |
Note : Centers Signature in look window.
|
| +------------------+ |
