Chapter
4
Step 6. Set Minimum Low Alarm
This value is a discrete load/tonnage value, not a percentage.
The range of this value is 0 to 9999. A value of 0 disables Minimum Low Alarm. Use a value here that represents a
minimum load/tonnage that is acceptable for the process.
Use this alarm setting when running in Peak Mode to alarm against low load/tonnage hits.
Rung 3:22
| CH1 LOW |
| CAPACITY |
| ALARM |
| SETTING |
| +MOV---------------+ |
|---------------------------------------------------------------------------------------------------------+MOVE +-|
| |Source N10:13| |
| | 0| |
| |Dest O:4.2| |
| | 0| |
| +------------------+ |
Page 4-4
