2.
Grasping the three parts of the
supply
spindle
, gently pull off the left
spindle cap
.
1.
With the
printer cover
open, remove the
supply spindle
from the
printer.
LOADING THE SUPPLY SPINDLE
LOADING THE SUPPLY SPINDLE cont.
3.
Slide the supply over the
spindle shaft
making
sure it unwinds in the direction indicated by the
arrows on each side of the
supply spindle.
When using supply that is less than
2" in width, make sure to set the
right
spindle cap
in the appropriate
notch on the
supply spindle
.
4. lOadinG Printer SUPPlieS
Left Spindle Cap
Spindle
Shaft
4.
Replace the
left spindle cap
on the end of the
spindle shaft
by pressing the caps together until
they touch the supply roll, making sure the
spindle
hooks
are aligned.
Loading 1" Supply Onto Supply Spindle
Right Spindle Cap Set for 1" Supply
Supply Spindle With 2" Supply
-8-
-7-
