1/12th SCALE 2WD ELECTRIC
SHORT COURSE TRUCK
7
Although great for first time users, Helion RC products are indeed advanced radio controlled
vehicles with sensitive electronics and moving parts capable of causing injury if used improperly.
Always use caution and common sense as failure to operate your Helion RC product in a safe and
responsible manner can result in damage to the product or other properties. Therefore this product
is not intended for use or maintenance by children without direct adult supervision. Helion RC and
your hobby dealer shall not be liable for any loss or damages, whether direct, indirect, special,
incidental, or consequential, arising from the use, misuse, or abuse of this product or any product
required to operate or maintain it
• For your safety, do not operate your vehicle in rain, electrical, or thunder storms.
• The vehicle should never be turned ON without the transmitter being turned ON.
• Never operate your vehicle when with low transmitter batteries.
›
Indicated by flashing LED on the transmitter
• Always check for proper radio system operation (steering and throttle) prior to letting go of the
vehicle. If the vehicle does not respond properly to transmitter input, turn the vehicle OFF and
inspect all connections and operating environment. Also see the Troubleshooting guide in this
manual.
• For the best experience and performance, operate in a dry (no puddles or mud), open environ-
ment away from traffic, and cars (never run into the street for any reason).
• Always turn off both transmitter and ESC and disconnect the battery from the ESC after use.
• Exercise extreme caution when touching the motor immediately after running your vehicle, it
may be HOT and may cause a burn.
• Always allow the motor in your vehicle to cool before using again
SAFETY TIPS
GENERAL CARE AND MAINTENANCE...
General Care:
• Always use clean, dry cloth or soft bristle brush to clean your equipment
• Never use chemical cleansers to avoid damage to the sensitive electronics and plastics
Maintenance:
We want you to enjoy your product to its fullest potential. For this to happen it is important to keep
your product clean and properly maintained. Lack of cleaning and maintenance can cause com-
ponent failure. For best and continued performance from your product it is recommended to briefly
inspect your product for damage every few runs. Typically, a good time to do this is when changing
the battery or while it is charging. If a problem is discovered, stop use immediately and seek repairs.
Continued use of failed components can cause more unnecessary damage to your product. Always