QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.com
Full manual available to download from: www.Helion-RC.com
5
Locate the spoiler and, using
a 2mm hex driver secure it as
shown using two M3 x 10mm
dome, button head, machine
screws and countersunk plastic
washers.
6
Fully charge your chosen Li-Po
battery in accordance with charging
and safety guidelines supplied with
the product. Note that the battery
must have a compatible High
Current T-plug. Also, note that if
using a NiMH battery, you will need
to reset the Low-Voltage Cut-Off on
your ESC to suit.
7
Locate the battery cradle on the
left side of the car, insert the fully
charged LiPo into the cradle and
tighten the hook and loop straps
to secure it firmly in position.
8
Plug the two pin headlight lead
into the channel 3 receiver socket
noting the polarity, i.e. black lead
closest to the edge of the receiver
case.
9
Remove the transmitter battery
cover and insert four AA alkaline
cells.
We recommend starting with a 2S Li-Po then
moving up to 3S and eventually 4S if desired.
