QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.com
Full manual available to download from: www.Helion-RC.com
Locate the wheelie bar and, using
a 2mm and 2.5mm hex driver,
secure it as shown with two M3
x 15mm and two M4 x 15mm
dome, hex head, machine screws.
1
Remove the components from
the box and ensure the contents
are correct:
• 1x Four 10TR 4WD truggy
• 1x IKONNIK ET4 2.4GHz
4-channel transmitter
• 1x wheelie bar
• 1x rear spoiler
• 1x screw set
• 1x Quick-Start Guide
2
To complete the final assembly of
your Four 10TR you will need the
following items:
• 1x 2-4S LiPo battery*
• 1x Suitable LiPo battery
charger
• 1x 2mm hex driver
• 1x 2.5mm hex driver
• 4x AA batteries.
3
Peel the protective wrapping
from your car, remove all four
body clips, the body itself and the
protective netting.
4
*ensure battery fits in truck if purchasing new
