QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.com
Full manual available to download from: www.Helion-RC.com
10
Ensure the radio switch is in the
off position, then connect the
battery to the ESC.
11
Reinstall the protective netting,
then replace the body and secure
it with the four body clips.
12
Switch ON your ET4 transmitter and
ensure that the LED is lit solid red
and that no alarms are audible.
And confirm beginner mode setting
is as desired.
13
Locate the switch and turn
ON your Four 10TR. In the
unlikely event that the car does
not operate, see the PAIRING
instructions at the back of this
guide.
14
Check the operation of the throttle
and steering. Pulling the throttle
trigger back will drive the car
forwards. Pushing the trigger
forwards will apply the brakes or
drive the car in reverse. Turning
the wheel right will cause the car
to turn right and vice versa.
15
Use the throttle and steering trim
buttons to fine tune the controls
of your car. Double check that the
Four 10TR tracks in a straight line
and doesn’t creep forwards or
backwards at zero throttle.