8
Quick Start Guide
1. Remove the components from the box and ensure the contents are correct:
▪ 1 x Conquest 2WD Monster Truck
▪ 1 x 2000mAh 6-cell NiMH battery pack
▪ 1 x IKONNIK ET3 2.4GHz 3-channel transmitter
▪ 1 x 6-cell wall charger
▪ 1 x Quick-Start Guide
2. Remove the four body clips from the car and lift the body clear.
3. Remove the two body clips that secure the dust cover and lift the cover
clear.
4. Locate the battery cradle in the center of the car, release the hook and loop
tape and withdraw the battery pack.
5. Plug the charger into a wall socket, connect the battery to the charger and
place the battery on a non-flammable surface. Switch the wall socket ON
noting that a fully discharged battery will be charged in approximately 3
hours. Periodically monitor the temperature of the battery when charging
and disconnect if it exceeds 120°F (49°C). Unplug the battery when
charged.
Summary of Contents for conquest 10MT XB
Page 41: ...www Helion RC com ...
