XTM Racing Baja Blade Operating Instructions Manual Download Page 1 | Manualshive

Page: 1 / 20

background image

1

Need help or have any questions? Email us at [email protected]

Thank you for purchasing the XTM Racing Baja Outlaw 4WD nitro truck. These Operating Instructions and separate Quick
Start Guide are provided to help you enjoy your new Baja Outlaw nitro truck without any of the hassles you might expect.
Please read through all of the literature that is provided with your truck. Doing so will help you become familiar with how
your truck, engine and radio system operates.

IMPORTANT

Before running your new truck, please read and understand the warnings listed on the next page. Failure to do so could lead
to bodily harm and/or injury. The Baja Outlaw 4WD nitro truck is not intended for those under 12 years of age, unless
closely supervised by an adult.

XTM Racing products are distributed exclusively by Global Hobby Distributors 18480 Bandilier Circle, Fountain Valley, CA 92728

All contents copyright © 2001, Global Hobby Distributors Version V1.0 May 2001

OPERATING

INSTRUCTIONS

OPERATING

INSTRUCTIONS

1
2
3
...
»

Summary of Contents for Baja Blade





















Reviews:

No comments

Related manuals for Baja Blade

Brand: Team Assocciated Pages: 9

Go! Cans XC6381

Brand: EB Excalibur Pages: 4

Brand: Carson Pages: 48

Topmaz Racing 85376

Brand: KidzTech Pages: 2

Top Maxx Vortex 84181

Brand: KidzTech Pages: 2

Brand: Kidzone Pages: 23

24V TRAIL RACER

Brand: Dynacraft Pages: 32

Brand: Yokomo Pages: 28

Brand: Yokomo Pages: 32

Brand: Fujimi Pages: 8

Brand: Fujimi Pages: 9

Brand: Tigershark Pages: 23

Brand: Quantum Pages: 16

Brand: Team Durango Pages: 48

Brand: Team Losi Pages: 55

Brand: REVELL Pages: 8

1962-65 NOVA WITH & WITHOUT AC

Brand: Vintage Air Pages: 23

Brand: Moni Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands