42
Determining the minimum flame position
To determine the minimum position, ignite the burners and leave them on in the minimum
position. Remove the knobs to gain access to the screws. With the help
of a small screwdriver, fasten or loosen the bypass screw by around 90 degrees. When the
flame has a length of at least 4mm, the gas is well distributed. Make sure that the flame
does not die out when passing from the maximum position to the minimum position.
Create an artificial wind with your hand towards the flame to see if the flames are stable.
For the oven burner, operate the oven burner at the minimum position for 5 minutes, then
open and close the oven door 2-3 times to check the flame stability of the burner.
Screw (inside the hole)
