59
C
A. Insert one end of this cable through the cable gland on the top of the indoor unit, and
connect it to A and B on the appropriate terminal block.
B. Fasten the cable gland to ensure the cable won't get loosen.
Connect the other end of the cable to the terminal block on the outdoor unit. A and B on the
C
.
indoor unit should be connected with A, B, and G on the outdoor unit, otherwise
communication failure error may occur.
A B
A
B
corresponding
with each other
5. Installation Walkthrough
5.7. Wiring
3) Connect the signal cable between the indoor and outdoor unit:
Retrieve the signal cable from the accessories bag.
For
monoblock
unit,
connect
sensor
cables
and
flow
switch
cables
between
indoor
and
outdoor
unit
as
per
wiring
diagram
and
marks
on
the
cable.
A
B
4) Connect the Plate electrical heating power cord between the indoor and outdoor unit .
Summary of Contents for Thermal Plus 12
Page 2: ...2 2...