58
1) Open the indoor unit’s front panel and remove the electrical box cover.
5. Installation Walkthrough
5.7. Wiring
5.7.5. Wiring Process
2) Acquire power
cables of suitable length that is compliant to all local safety regulations.
Connect
power
cables
to
the
power
supply
terminal
inside
the
unit.
【
】
Connect of drainage pipe
1.Unscrew the 3pcs screws on top of front
panel.
When the tank need to be drained, please do as per following instruction:
3.A soft pipe and ball valve have already been
connected to the tank.plaese pull it out from
the unit.
2.Hold the front panel up by 10~15mm,
disconnect the quick connector from wired
controller, and then take out the front panel.
Disconnect the
quick connector.
Screw
Screw
Summary of Contents for Thermal Plus 12
Page 2: ...2 2...
