Heidolph Hei-VOLUME Distimatic Pro, Assembly Instructions Manual

Page: 53 / 146

50
Introduction
About this document
These instructions describe the assembly, wiring and tubing of the components of
an automatic module, type Hei-VOLUME Distimatic Pro on large-scale rotary evapo-
rators of the type Hei-VAP Industrial (Part A) and on rotary evaporators of the type
Hei-VAP Expert and Hei-VAP Ultimate (Part B).
Typographic conventions
Standardized symbols, highlighting elements, and signal words are used in this docu-
ment to identify warnings, cautions, important information, and special text contents.
Symbol Signal word / explanatory note
Warning symbols in combination with a signal word indicate
dangers:
DANGER
Indicates an immediate dangerous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a potential danger which, if not avoided, may result in
death or serious injury.
CAUTION
Indicates a potential hazard which, if not avoided, damage to prop-
erty and minor to moderate injuries can occur.
Mandatory signs are used to indicate important and useful informa-
tion on handling a product.
This information is used to ensure operational safety and to main-
tain the value of the product.
➜
The arrow symbol indicates instructions to be followed in order to
ensure the operational safety when handling the product.
Copyright protection
This publication is protected by copyright and intended for internal use by the purchaser
of the product only.
No part of this publication may be transmitted or reproduced in any form, by any
means, without the prior written consent of the copyright owner Heidolph Instruments
GmbH & Co. KG. Any violation is subject to compensation for damages.