49
Troubleshooting
Troubleshooting
Troubleshooting
The following table shows possible faults and solutions:
Error (message)
Possible cause, remedy
Display remains dark
after switching on
➜
No power supply
–
Check that the power plug is correctly connected
➜
Electronic defect
–
Contact technical service
Rotation cannot be
started, rotation
stops unexpectedly,
[
Overload
] error
message
➜
Motor or power supply unit is overloaded
–
Torque is too high
–
Blade is blocked
➜
Rotation stops completely after two restart attempts
–
Remove blockage cause
–
Switch rotation back on again
[
Overheating
]
error message
➜
Motor/Electronics too hot: Overheat protection has
tripped
–
Automatic shutdown. Allow the motor to cool and
switch the device back on
If a fault cannot be rectified with the described suggestions, please contact an autho
-
rized sales representative or our technical service (see section “Contact information
Heidolph international” on page 54).
Summary of Contents for Hei-TORQUE Core
