41
Commissioning
Set up the device
The described overhead stirrers can be mounted on a stand or on a wall grid. Any
necessary mounting materials are available as accessories, see www.heidolph.com.
Follow the safety instructions below:
WARNING
Risk of injury, risk of damage to property due to fall or tilting
If assembled improperly, the device can also fall or tip over when
unloaded!
➜
If the overhead stirrer is mounted on a wall grid, ensure that
the wall grid and all mounting elements have sufficient self-pro
-
tection and load capacity!
➜
When mounting the overhead stirrer on a stand, make sure that
the setup is sufficiently stable.
–
The stand may only be set up on a stable surface.
–
When mounting on a stand, follow the specific setup
instructions for the stand.
–
Always align the overhead stirrer so that the chuck
vertically faces the notional centerline between the
long
stand base bars, see following figure:
After assembly of the overhead stirrer, check all screw connections
/ clamping screws for tight fit.
Summary of Contents for Hei-TORQUE Core
