Heidolph Hei-TORQUE Core, Operating Instructions Manual

Page: 48 / 88

48
➜ If the rotational movement is stopped before the timer has expired, it is stopped
and continues running when the rotational movement restarts.
➜ If the timer time expires normally (no interruption due to manual stopping of the
rotational movement), the rotational movement is stopped automatically and the
timer is reset to the set time, e.g. 60 s.
➜ If the rotational movement is restarted after the timer expired normally, the timer
is restarted with the set time.
While the timer is running, the remaining time is shown on the
display to the nearest second. At the same time, the timer symbol
appears on the left at the top of the screen.
To deactivate the timer, it must be switched to [
OFF
] via the
Settings menu.
Fast mode
With this function, the device can be set for a certain time to the maximum speed of
2,000 rpm with the press of a button:
➜ Press the [
Fast mode
] button on the front of the device and keep it pressed:
– The rotation speed is increased to and kept at 2,000 rpm.
➜ Let go of the [
Fast mode
] button to reduce the rotation speed back to the previ-
ously set value.
The fast mode function can be activated at any time and inde-
pendently of the operating state. I.e., the stirrer tool starts, from
a standstill if applicable, as soon as the [
Fast mode
] button is
pressed.
Fast mode phases are not recorded in timer mode.
Operation