HEIDENHAIN QUADRA-CHEK 100, Operating Instructions Manual, Page: 67 / 81

Quadra-Chek
®
QC200
4-25
Scroll through the Setup menu Setup menu Setup menu Setup menu Setup menu
to highlight Non-Linear Error
Non-Linear Error
Non-Linear Error Non-Linear Error Non-Linear Error
Correction (NLEC) Correction (NLEC)
Correction (NLEC) Correction (NLEC)
Correction (NLEC).
NOTE NOTE
NOTE NOTE
NOTE
Non-Linear Error Correction
Non-Linear Error Correction Non-Linear Error Correction Non-Linear Error Correction Non-Linear Error Correction
(NLEC) is provided only as a
(NLEC) is provided only as a
(NLEC) is provided only as a (NLEC) is provided only as a (NLEC) is provided only as a
purchased option, and is not
purchased option, and is not purchased option, and is not purchased option, and is not purchased option, and is not
included in all systems.
included in all systems.
included in all systems. included in all systems. included in all systems.
Error correction coefficients are applied to each cell of a grid that
covers the measuring area to compensate for encoder and ma-
chine travel variations.
The cells of a standard grid are measured at each corner. The mea-
sured values are compared to the nominal values of the standard
to generate correction coefficients for each cell of the grid. The
correction coefficients are then used to provide error compensa-
tion for the entire measuring area.
The 5 X 4 grid in the following example contains 12 cells. Each
cell corner is an X,Y position for data entry starting in the lower
left corner at 1,1. The lower left data entry position 1,1 corre-
sponds to the datum for the grid (0,0).
The offset from the Machine zero to the standard grid’s datum
must also be entered as data.
Non-Linear Error
Correction (NLEC)