HEIDENHAIN QUADRA-CHEK 100, Operating Instructions Manual, Page: 48 / 81

Chapter 4 Setup
4-6
Display
Startup Linear/Angular
Radix
Scroll through the Setup menu Setup menu Setup menu Setup menu Setup menu
to highlight the Display func- Display func- Display func- Display func- Display func-
tion tion
tion tion tion.
Press the right cursor key right cursor key
right cursor key right cursor key
right cursor key to
select items in the right portion
of the screen.
Display parameters are divided
into measurement display pa-
rameters and measure resolu-
tion.
Set the measurement display
parameters as required. Highlighting a parameter causes selec-
tion alternatives to be displayed over the softkeys across the bot-
tom of the screen.
Startup Linear Startup Linear Startup Linear Startup Linear Startup Linear and Startup Angular Startup Angular Startup Angular Startup Angular Startup Angular settings define the default
display of linear and angular measurements. Linear measurements
can be displayed in English or metric units of measure, and angu-
lar measurements can be displayed in degrees, minutes and sec-
onds or in decimal degrees. Enter the desired settings and scroll
to highlight Radix Radix Radix Radix Radix.
Radix settings are available for
English (a dot: 1.000) or Euro-
pean (a comma: 1,000) presen-
tations. Enter the desired pa-
rameter setting and scroll to
Current Angular
Current Angular Current Angular Current Angular Current Angular.