HEIDENHAIN QUADRA-CHEK 100, Operating Instructions Manual, Page: 49 / 81

Quadra-Chek
®
QC200
4-7
Current Angular
Display Resolution (Disp Res)
Current Angular Current Angular
Current Angular Current Angular Current Angular displays of
measured angles can be set to
degrees, minutes and seconds
or to decimal degrees. This set-
ting defines the presentation of
measured angles until power to
the system is turned off. When
power is reapplied to the system
the Startup Angular Startup Angular
Startup Angular Startup Angular
Startup Angular setting will
be used to define the display of
measured angles. Enter the desired parameter setting and scroll
to Axis Axis Axis Axis Axis.
Select an encoder axis and set
the numeric values of the dis-
play resolution parameters to
match the encoder and mea-
surement instrument being used
by scrolling to a parameter and
entering numeric values using
the front panel keypad. Press
the Enter key Enter key Enter key Enter key Enter key to complete the
entry of each new value. Press
the left cursor arrow left cursor arrow left cursor arrow left cursor arrow left cursor arrow or Finish Finish Finish Finish Finish
button button button button button to save the Display pa- Display pa- Display pa- Display pa- Display pa-
rameters rameters
rameters rameters
rameters and return to the
Setup menu
Setup menu Setup menu Setup menu Setup menu.