HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING, User Manual

Page: 596 / 618

596 Tables and Overviews
1
8
.3 T
e
c
hnical Inf
o
rm
ation
Actual position capture
„
Actual positions can be transferred directly into the NC program
Program verification graphics
Display modes
Graphic simulation before program run, even while another program is being run
„
Plan view / projection in 3 planes / 3-D view
„
Magnification of details
Programming graphics
„
In the Programming and Editing mode, the contours of the NC blocks are drawn on
screen while they are being entered (2-D pencil-trace graphics), even while another
program is running
Program Run graphics
Display modes
„
Graphic simulation of real-time machining in plan view / projection in 3 planes /
3-D view
Machining time
„
Calculating the machining time in the Test Run mode of operation
„
Display of the current machining time in the Program Run modes
Returning to the contour
„
Mid-program startup in any block in the program, returning the tool to the calculated
nominal position to continue machining
„
Program interruption, contour departure and return
Datum tables
„
Multiple datum tables
Pallet tables
„
Pallet tables (with as many entries as desired for the selection of pallets, NC programs
and datums) can be machined workpiece by workpiece or tool by tool
Touch probe cycles
„
Calibrate touch probe
„
Compensation of workpiece misalignment, manual or automatic
„
Datum setting, manual or automatic
„
Automatic workpiece measurement
„
Cycles for automatic tool measurement
„
Cycles for automatic kinematics measurement
Specifications
Components
„
MC 6241 or MC 6222 main computer
„
CC 6106, 6108 or 6110 controller unit
„
Keyboard
„
15.1-inchor 19-inch TFT color flat-panel display with soft keys
Program memory At least 21 GB,
Input resolution and display
step
„
Up to 0.1 µm for linear axes
„
Up to 0.0001° for angular axes
Input range
„
Maximum 99 999.999 mm (3.937 inches) or 99 999.999°
User functions