-
Choose a suitable location for the heater, taking into account the safety instructions above.
-
Insert the plug of the heater into a suitable socket.
-
Turn the thermostat knob fully in a clockwise direction to the maximum setting.
-
Turn on the heating elements by means of the rocker switches on the side panel.
-
When the heating elements are on, the switches will illuminate.
-
For maximum heat output, both switches should be on.
-
When the desired room temperature has been reached, the thermostat knob should be turned
slowly anti-clockwise until the thermostat is heard to click off and the lights on the elements
switches turn off as well.
-
After this the heater will keep the air temperature in the room at the set temperature by
switching on and off automatically.
The SY-CLCT20 also incorporates an internal fan (Turbo), which can be switched on independent of
the heating elements.
Fan Operation:
-
This is operated by means of the switch with the fan symbol alongside it.
-
The fan will only operate with the thermostat in the “on” position and can be used when the
heating elements are “on” to blow warm air into the room.
-
In warm conditions, the fan can be used with the heating elements “off” to blow cool air into the
room.
CLEANING THE HEATER
-
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
-
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
-
Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
-
When the heater is not used for a long period, it should be protected from dust and stored in a clean
dry place.
