WELCOME
Thank you for purchasing the new Electric Convection Heather SY-CLCT20. In order to fully benefit
from this product please read the following instructions carefully and store this user manual in a safe
place for future reference.
SAFETY INSTRUCTIONS
1. Do not use the heater unless the feet are correctly attached.
2. Ensure the power supply to the socket into which the heater is plugged is in accordance
with the rating label on the heater and that the socket is earthed.
3. Keep the power cord away from the hot body of the heater.
4. Warning: Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
5. Warning: in order to avoid overheating, do not cover the heater.
6. This product is only to be used indoors.
7. Do not place the heater on carpets having a very deep pile.
8. Always ensure that the heater is placed on a firm level surface.
9. Do not place the heater close to curtain or furniture in order to avoid a fire hazard.
10. Warning: heater is not located immediately below a socket-outlet.
11. Do not insert any object through the heat outlet or air grilles of the heater.
12. Do not use the heater in areas where flammable liquids are stored or where flammable
fumes may be present.
13. Always unplug the heater when moving it from one location to another.
14. Warning: If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid a hazard.
15. This appliance is not intended for use by persons (Including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instructions concerning the use of the appliance or
a person responsible for their safety.
16. Children should be supervised to ensure that they do not play with the appliance.
ASSEMBLY OF THE HEATER
Before using, the heater
，
the feet
（
supplied separately in the carton
），
must be fitted to the unit. These
are to be attached to the base of the heater using the 4 self-tapping screws provided taking care to
ensure that they are located correctly in the bottom ends of the heater side moldings.
OPERATION OF THE HEATER
Note: It is normal when the heater is turned on for the first time or when it is turned on after not having
been used for a long period, it may emit some smell and fumes. This will disappear when the heater
has been on for a short while.
