23
Installation & Owner‘s Manual
Set the hour value of clock.
Set the minute value of clock.
27
28
Cancel Timer-TIME ON&TIME OFF
In the unlocked state, press the button for 3
second and the Timer-TIME ON & TIME OFF function
will be canceled.
INCREASE/UP
If button is unlocked, corresponding value will
increase by pushing .
●
When setting temperature, press more than
1s, Temperature value will be increased
continuously;
●
When Setting clock/timer, press more than
1s, Clock/timer value will be increased
continuously.
DECREASE/DOWN
If button is unlocked, corresponding value will
decrease by pushing .
●
When setting temperature, press more
than 1s, temperature value will be decreased
continuously;
●
When Setting clock/timer, press more
than 1s, Clock/timer value will be decreased
continuously.
Press the button to enter Timer-
TIME OFF setting. the hour value of
the clock will flash slowly.
Press the button again, confirm
the hour setting. Then the minute
value of clock will flash slowly.
Press the button again or no
operation for 10 second, flashing will
stop and confirm the Timer-TIME
OFF setting.
6.3 Combination button
6.4 Auto-restart
If it is power off, the unit can remember part of setting parameters (On
or Off state, operating mode, setting water temperature); when it is
re-power on, the unit will be operated as the previous remembering
parameters.
6.5 Button Auto Lock
When there is no operation of button for 1 minute, buttons will be
locked except Unlock button( ), Press for 3s, unlock
buttons.
6.6 Screen Auto Lock
If there is no operation of button for 30s, screen back light will be
extinguished Press any button will lighten the screen back light
No.
Icon
Description
Clear error
code
Query
mode
+
+
Press the two buttons at
the same time to clear all
stored error & protect
codes, and the buzzer
will buzz one time.
Press the two buttons at
the same time for 1sec
to go into query mode.
Under query mode user
can check unit setting &
running parameters by
pressing
circularly. Press button
for 1s or no
button operation for 30s,
then quit query mode.
ENGLISH
