18
Installation & Owner's Manual
No
Icon
Description
There are six timers can be set.
If anyone of them has been set,
will lighten the corresponding one when
screen is unlocked
If there is none of timers has been set,
will keep extinguished.
If timer is being set, will flash the
corresponding one with 2HZ frequency as
well lighten the timer which has been set.
Timer
Clock and clock setting
shows the clock.
Whenever there is any setting for clock,
will be lightened.
No.
Icon
Description
Manually turn e-heater ON
If E-heater is OFF, follow these steps below to
manually turn it on.
If E-heater is already ON, Press will lead
to show invalid icon on the display.
Any press of button is effective only under button and display unlocked
state.
Icon will flash.
Confirm manually turning E-heater on,
then E-heater is activated to Heat up
water to the target temperature. After that,
if need manually turn E-heater on again,
please repeat these steps.
Invalid
No
Icon
Description
Set Clock
3.1
3.2
Set the hour value of clock.
Confirm the hour setting. Then the minute
value of clock will flash slowly.
Set the minute value of clock.
Confirm the minute setting and quit clock
setting.
Press button for 3 sec to enter clock
setting. Then icon will be
lightened and the hour value of clock will
flash slowly.
Set Timer
Set the hour value of timer.
Set the minute value of timer.
Set the action(ON or OFF) of the timer.
Set the water temperature of the setting timer.
Confirm the action(ON or OFF) of the timer.
Enter timer setting.
Select timer( ~ ) which needs to be
set. The timer icon will flash slowly if it is
selected
Confirm the selected setting timer.
Then will be lightened. Then
the hour value of timer will flash slowly.
Confirm the hour value of timer. Then the
minute value of timer will flash slowly.
Confirm and complete the timer. Then
repeat this process to set another timer.
Confirm the minute value of timer. Then
ON or OFF icon following the setting
timer will flash slowly.
ON/OFF
ON
OFF
The display screen will automatically
display different value at by
different action. It will display the last set
temperature and icon ,if the action
is ON, and will display if the action
is OFF.
INCREASE
If screen is unlocked, corresponding value will
increase by pushing .
● When setting temperature, press more than
1s, Temperature value will be increased continu-
ously;
● When Setting clock/timer, press more than
1s, Clock/timer value will be increased continuously;
● When setting vacation days, press more
than 1s, day value will be increased continuously;
Under query mode, check items will page up by
pressing
Table 5-2
Fig.5-3
Long pressing the E-HEATER key for 10s then can
shift to set the temperature display unit; from "F" to
"C" or from "C" to "F"; the default is "C"; (when it's
shifted to display "F", it still will display "C" while it
operates spot check).
SET