HeatSeeker VORTEXC, Installation & User Manual

Page: 8 / 32

2. OPERATION
2.1. NOTICE BEFORE USING
1. Users are advised to start the water
circulation prior to turning on the heat
pump. It is also recommended that the
heat pump be turned off prior to the
interruption of water flow.
2. Check for any water leakage in connecting
pipework, then turn on the power supply,
press the ON/OFF button of the heat
pump, and set desired temperature.
2.2. OPERATION INSTRUCTIONS
SYMBOL DESIGNATION OPERATION
Power ON/OFF Press to power on or off the heat pump
Up/ Down Press to set desired water temperature
Heat/Cool/Auto Press to switch between cooling, heating and auto
Fan Press to select Silence mode ON/OFF
Note:
1. You can set the desired water temperature from 12°C to 35°C.
2. The numbers on the right of the display show the inlet water temperature. The numbers on
the left of the display show the outlet water temperature.
3. Turn on the heat pump and the fan will start to run after 3 minutes. In another 30 seconds,
the compressor will start to run.
�C �C
MIN
Heatseeker VortexC Inverter Heat Pump
Installation & User Manual
06