Heatrae Sadia Megaflo Eco 125DD, Manual

Page: 29 / 40

29
ITEM DESCRIPTION PART NUMBER
1 Cold water inlet control kit - Complete (includes Items 2, 4 & 6) 95 605 894
2 3 bar Pressure reducing valve - Complete 95 605 886
3 3 bar Pressure reducing valve - Cartridge 95 605 891
4 8 bar Expansion valve - Complete 95 605 893
5 8 bar Expansion valve - Cartridge 95 605 888
6 Stopcock 95 605 885
7 Immersion heater gasket 7035165
8 Immersion heater key spanner (NOT SHOWN) 95 607 861
9 Immersion heater blanking plug (NOT SHOWN) 95 605 881
10 Tundish (NOT SHOWN) 95 605 838
11 Insulation set for T&P relief valve (NOT SHOWN) 95 607 922
12 Temperature & Pressure relief valve (NOT SHOWN) 95 605 810
13 Set of compression nuts and olives (NOT SHOWN) 95 607 838
14 Drain valve 1/4 turn (NOT SHOWN) 95 605 051
15 Swept tee joint (for secondary return) (NOT SHOWN) 95 605 812
16 Direct element - Titanium lower 95 606 988
17 Immersion heater backnut - Brass 95 607 940
18 Direct combined thermostat / thermal cut-out 95 612 720
19 Direct (Titanium) controls cover 95 614 119
20 Direct mounting plate 95 607 929
21 3 way terminal block 95 607 932
34 Direct element - Titanium upper 95 606 989
22 Indirect element - Incoloy 95 606 984
23 Immersion heater backnut - Plastic (Black) 95 605 132
24 Indirect combined thermostat / thermal cut-out 95 612 719
25 Indirect controls cover 95 614 118
26 Indirect mounting plate 95 607 931
27 6 way terminal block 95 607 933
28 2 port motorised valve (22mm compression connections)(NOT SHOWN) 95 605 819
29 1/2" BSP Sensor Pccket Assembly Long 7 032 579
12. Spare parts
Table 8: Spare parts list
12.1 Spare parts list
A full range of spare parts are available for the cylinder range. Refer to the Technical Data label on the unit to identify
the model installed and ensure the correct part is ordered.