HeatQ NEX 1.0, Manual

Page: 8 / 8

str. 8
13. When power supply is recovered after its previous disappearance (power cut or unplugging) with the controller
on, the electric heating element begins to operate in the mode before the voltage disappearance.
14. The electric heating element is adjusted to operate with a standard timer.
VI. Failures
In case when the electric heating element does not work properly:
1.
Check the modes of the electric heating element with the user manual (chapter V, point 12).
2. Check if the electric heating element is installed properly and connected to the power source.
3. Check the heating agent level in the radiator (the way of its filling up).
In case of any further failures, the electric heating element should be disassembled and returned to the distributor.
VII. Maintenance of the electric heating element
CAUTION! While cleaning the electric heating element with detergents or liquids, unplug the electric
heating element. Prevent the controller from getting wet.
Use soft cloths or sponges for cleaning the surface. Do not use any aggressive or abrasive cleaning agents in order
not to damage the decorative coat.
The painted surface should be wiped with warm water with delicate washing substances.
Chrome-plated surfaces should be cleaned with special cleaning agents intended for cleaning chrome-plated
surfaces.
VIII. Disassembly of the electric heating element
1. Switch the electric heating element off by pressing the switch and unplug it.
2. In case of the electric heating element with an electric radiator disassembly it together with the radiator and
turn the electric heating element upside down. There is no need to remove the heating agent.
3. If the radiator is connected to the central heating close both supply and return valves. Remove the heating agent
from the radiator.
4. Remove the electric heating element from the radiator core with the 22 mm wrench.
CAUTION! The electric heating element must not be held by the cover while assembling/ disassembling.
IX. Disposal of the electric heating element
After termination of the use the electric heating element must not be disposed as a municipal
waste. The device should be taken to the point of collection and recycling of electric and electronic
waste. Any information about the proper collection and recycling point may be obtained in the store
or from the manufacturer.
By ensuring wastes are disposed properly you will help to prevent potential
negative consequences for the environment.