background image

8

Heatilator  • HEIR36, HEIR42, HEIR50 Owner’s Manual  •  2285-981 Rev. H  •  5/15

Figure 3.2  General Operating Parts

B.  General Operating Parts

Figure 3.2 references the general operating parts of the 

appliance and the section of this manual in which they are 
discussed.

DECORATIVE FRONTS

(NOT SHOWN)

SECTION 4.B.

FIXED GLASS ASSEMBLY

(NOT SHOWN)

SECTION 4.B & 4.C

MANTEL

CLEAR SPACE

SECTION 3.A.

RATING PLATE/GLASS CLIP TOOL LOCATION

SECTION 3.B.

OPERATION DURING 

A POWER OUTAGE

SECTION 3.H.

Rating Plate/Glass Clip Tool Location

The rating plate for this model is located underneath the 

fi

 rebox  af

fi

 xed to a tray that must be accessed using a 

1/4 inch nut driver.  See Figure 3.3.  To access the rating 
plate, remove the screw that secures the tray to the appli-
ance bottom and pull the tray out. 
The glass clip removal/installation tool is also located in 
this area.  To access the glass clip tool, remove the screw 
that secures it to the appliance bottom. 

Figure 3.3  Rating Plate/Glass Clip Tool Location

RATING PLATE

RATING PLATE

GLASS CLIP TOOL

GLASS CLIP TOOL

Summary of Contents for HEIR36H






























Reviews: