33
Heatilator • HEIR36-IFT, HEIR42-IFT, HEIR50-IFT Owner’s Manual • 2458-981 Rev. C • 2/17
C. IFT-RC400 IntelliFire™ Touch Remote Control User Guide
User Guide
IFT-RC400
IntelliFire™ Touch Remote Control
FUNCTIONS
DYNAMIC ICONS
INDICATOR BAR
SCREEN
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Thermostat
Introduction
This user guide serves as a quick reference to the screen,
functions and indicators on your IntelliFire
™
Touch
Remote control.
FUNCTIONS
SELECTION
INDEX
ROOM TEMPERATURE
DISPLAY
Flame Height
<RXFDQVHW\RXUGHVLUHGÀDPHKHLJKWOHYHOWRDIIHFWWKH
ambiance and control the heat output.
<RXUDSSOLDQFHZLOOUHPHPEHUWKHSUHYLRXVÀDPHKHLJKW
VHWWLQJDQGDGMXVWWKHÀDPHWRWKDWOHYHOVHFRQGVDIWHU
start.
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, place
your remote control in the same general space that
you want to have the temperature controlled by your
appliance. For best results, keep your remote
control away from direct radiant heat from the appliance,
adjacent windows and doors, HVAC vents, and direct
sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next,
simply select your desired set temperature by using the
DUURZ NH\V DQG SUHVV 21 WR FRQ¿UP WKH VHWWLQJ 7KH
actual room temperature (RT), measured by your remote
control, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 3 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
WKHÀDPHKHLJKWEDVHGRQWKHGLIIHUHQFHEHWZHHQWKH57
DQGWKH67$VWKH57ULVHVFORVHUWRWKH67WKHÀDPH
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
GHVLUHGÀDPHKHLJKWOHYHO<RXUDSSOLDQFHZLOO
DXWRPDWLFDOO\DGMXVWÀDPHKHLJKWEDVHGRQWKHGLIIHUHQFH
between the RT and ST.
The Screen, Functions and Indicators sections of the IFT-RC400 User Guide are included in this section for reference. Fre-
quently Asked Questions and Troubleshooting are discussed in Section 5.B and Section 5.C.
