48
Heatilator • Caliber CNXT Series • 4047-132 Rev P • 11/07
H. Install the Remote Cover Plate
The remote cover plate shipped in the bottom of the appli-
ance
MUST
be placed over the control plate before operat-
ing the appliance. Not doing so may result in overheating the
controls on the plate.
Install the Cover Plate
• Locate cover plate (see Figure 10.4) and remove from
appliance.
Figure 10.4 Remote Cover Plate - Shipping Location
• Bend four legs at 90° angle. See Figure 10.5.
Figure 10.5 Bend Legs
• Place over control plate so that all of the control plate is
covered and legs are on bottom pan of appliance. See
Figures 10.6 and 10.7.
Figure 10.6 Placing Remote Cover Plate
Figure 10.7 Remote Cover Plate - In Place
• Make sure all wires are under the top of the cover plate
and that there are no wires pinched between legs and the
bottom pan.
Summary of Contents for CNXT4236IH CNXT4842IH
Page 88: ...88 Heatilator Caliber CNXT Series 4047 132 Rev P 11 07 This page intentionally left blank...
Page 89: ...Heatilator Caliber CNXT Series 4047 132 Rev P 11 07 89 This page intentionally left blank...
Page 90: ...90 Heatilator Caliber CNXT Series 4047 132 Rev P 11 07 This page intentionally left blank...
