background image

2

Heatilator • ECO-ADV-WS22 • 7057-128D • September 15, 2011

SAMPLE OF SERIAL NUMBER / SAFETY LABEL

LOCATION:  Back of Appliance

Read this manual before installing or operating this fi replace.

Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Heatilator wood burning 
appliance. The wood burning appliance you have selected 
is designed to provide the utmost in safety, reliability and 
effi ciency.

As the owner of a new wood burning appliance, you’ll want 
to read and carefully follow all of the instructions contained 
in this owner’s manual. Pay special attention to all cautions 
and warnings.

This owner’s manual should be retained for future refer-
ence. We suggest you keep it with your other important 
documents and product manuals.

Your new wood burning appliance will give you years of 
durable use and trouble-free enjoyment. Welcome to the 
Heatilator family of wood burning products!

NOTE:  Clearances may only be reduced by means 
approved by the regulatory authority having jurisdiction

SPÉCIFICATIONS DE LA VENTILATION:

MUR SIMPLE: De six (6 inches) (152mm) de diamètre le connecteur de c
minimum d'acier noir ou bleu de minimum de 24MSG, avec une cheminé
usine UL103HT* de Classe "A", adéquate pour usage avec les combustion
ou une cheminée de briques, avec espaces libres référés.
MUR DOUBLE: De six (6 inches) (152mm) de diamètre, le connecteur d
d'air isolé pour mur double avec une cheminée bâtit en usine UL103HT* d
"A, ou une cheminée de briques, avec espaces libres alloués.

MAISON MOBILE:  Utiliser un conduit de mur double par Dura-Vent DV
Metalbestos DS ou Security DL. Doit être équipé d'un arrêt d'étincelle. U
espaces libres pour mur double comme mentionné ci-bas.

MINIMUM CLEARANCES TO COMBUSTIBLES  In Inches & (Millimeters) 

NOTE:  All "A" , "C" and "F" Dimensions are to inside diameter of the flue collar. 

LISTED ROOM HEATER, SOLID FUEL TYPE.   
ALSO FOR USE IN MOBILE HOMES.  (UM) 84 HUD .  

"For Use with Solid Wood Fuel Only"  

1445 N. Highway, Colville, WA 99114

www.heatilator.com

Install and use only in accordance with 
manufacturer's installation and operating 
instructions.  Contact local building or fire officials 
about restrictions and installation inspections in 
your area. Do not obstruct the space beneath 
heater.

WARNING - For Mobile Homes

:  Do not install in 

a sleeping room.  An outside combustion air inlet 
must be provided and unrestricted while unit is in 
use.  The structural integrity of the mobile home 
floor, ceiling and walls must be maintained.  The 
stove needs to be properly grounded to the frame 
of the mobile home.  Components required for 
mobile home installation:  Outside Air Kit, Part 
Number OAK-ACC.

Refer to manufacturer's instructions

 and local 

codes for precautions required for passing 
chimney through a combustible wall or ceiling and 
maximum offsets.
Inspect and clean chimney frequently - Under 
Certain Conditions of Use, Creosote Buildup May 
Occur Rapidly.
Do not connect this unit to a chimney serving 
another appliance.
Optional Components:  Optional Blower, Part 
BK-ACC.
Electrical Rating:  115 VAC, 1.2 Amps, 60 Hz.
Route power cord away from unit.  Do not route 
cord under or in front of appliance.

DANGER: Risk of electrical shock.

  Disconnect 

power supply before servicing.
Replace glass only with 5mm ceramic available 
from your dealer.
Do not use grate or elevate fire.  Build wood fire 
directly on hearth.
Do not overfire - if heater or chimney connector 
glows, you are overfiring.

CAUTION

:

 

U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to 

comply with July 1990 particulate emission standards.

2010 2011 2012

 

Jan. Feb. Mar. Apr. May June 

July Aug. 

Sept. 

Oct. Nov. Dec.

PREVENT HOUSE FIRES 

    

Report / Rapport:  3198460

Manufactured by:

HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN AND CLOTHING AWAY. CONTACT MAY CAUSE SKIN BURNS.
KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL FAR AWAY FROM THE APPLIANCE. SEE NAMEPLATE AND INSTRUCTION

 

A B C D E F G H 

SINGLE WALL PIPE

 

10 (254)  8.25 (210)  21 (533) 

11 (279) 

3.5 (89)  12.5 (318)  49 (1245) 

*

DOUBLE WALL PIPE

 

9 (229) 

7 (178) 

19.5 (495) 

9 (229) 

3 (76) 

12 (305) 

49 (1245)  10 (254)

SINGLE WALL PIPE     

  

9.25 (235)  7.5 (191) 

18 (457) 

8 (203) 

3.5 (89)  12.5 (318)  49 (1245) 

*

 

DOUBLE WALL PIPE

 

9.25 (235)  7.5 (191) 

18 (457) 

8 (203) 

3 (76) 

12 (305) 

49 (1245)  10 (254)

VENT SPECIFICATIONS:

SINGLE WALL:

 Six inch (6 inches) (152mm) diameter, minimum 24 MSG black or 

blued steel connector pipe, with a listed factory-built UL103HT* Class "A" chimney, 
suitable for use with solid fuels, or a masonry chimney, and the referenced clearances.

DOUBLE WALL:

 Six inch (6 inches) (152mm) diameter, listed double wall air 

insulated connector pipe with listed factory-built UL103HT* Class "A" chimney, or  a 
masonry chimney and the referenced clearances

*In Canada must comply with Standard CAN/ULC-S629-M87 for the 650 degree 

Factory-built chimneys.

MOBILE HOME:

  Use double wall pipe by Dura-Vent DVL, Selkirk Metalbestos DS or 

Security DL double wall connector pipe. Must be equipped with a spark arrestor.  

Apply double wall clearances below when installing unit.

SERIAL NO.

 / NUMÉRO DE S

WS22 WOOD STOVE

  

7057-

CHAUD LORS DE L'OPÉRATION. NE PAS TOUCHER. GARDEZ LES ENFANTS ET LES VÊTEMENTS LOIN DE L'ESPACE DÉSIGNÉ DE L'INSTALLATION. LE CONTACT PEUT C
DES BRÛLURES À LA PEAU. GARDEZ LES MEUBLES ET LES MATÉRIAUX COMBUSTIBLES LOIN DE L'ESPACE DÉSIGNÉ DE L'APPAREIL. VOIR L'ÉTIQUETTE ET LES INSTR

ATTENTION

:

APPAREIL DE CHAUFFAGE DE PIÈCE, DE TYPE DE 
COMBUSTIBLE SOLIDE, POUR USAGE DANS LES 
MAISONS MOBILES. (UM) 84-64 HUD. "Pour Usage 
Avec Bois Solide Seulement" 

Installez et utilisez en accord avec les instructions 
d'installation et d'opération du fabricant. Contactez le bureau 
de la construction ou le bureau des incendies au sujet des 
restrictions et des inspections d'installation dans votre 
voisinage. Ne pas obstruez l'espace en dessous de l'appareil.
AVIS - Pour Les Maisons Mobiles:  Ne pas installer dans une 
chambre à coucher. Un tuyau extérieur de combustion d'air 
doit être installé et ne doit pas être obstrué lorsque l'appareil 
est en usage. La structure intégrale du plancher, du plafond et 
des murs de la maison mobile doit être maintenue intacte. 
L'appareil de chauffage doit être fixé à la charpente de la 
maison mobile. Les composants requis pour l'installation des 
maisons mobiles: Assemblage d'air extérieur, Numéro de 
Pièce OAK-ACC.
Référez vous aux instructions du fabricant et des codes 
locaux pour les précautions requises pour passer une 
cheminée à travers un mur ou un plafond combustibles, et les 
compensations maximums.
Inspectez et nettoyez la cheminée fréquemment. Sous 
certaines conditions, il se peut que la créosote s'accumule 
rapidement.
Ne pas connecter cet appareil à une cheminée servant un 
autre appareil.
Composants Optionnels: Ventilateur Optionnel, Pièce 
BK-ACC.
Puissance Électrique: 115 VAC, 1.2 Amps, 60 Hz.
Éloignez le fil électrique de l'appareil. Ne pas faire passer le fil 
électrique au dessus ou en dessous de l'appareil.
DANGER: Il y a risque de décharge électrique.  Déconnectez 
le fil électrique de la prise de contact avant le service.
Remplacez la vitre seulement avec une vitre céramique de 5 
mm disponible chez votre fournisseur.
N'élevez pas le feu. Bâtissez le feu de bois directement sur 
l'âtre.

Ne pas surchauffer. Si l'appareil de chauffage ou le tuyau de 

PRÉVENTION DES FEUX DE MAISON 

ESPACES LIBRES MINIMUM DES MATÉRIAUX COMBUSTIBLES En Po

(millimètres) 

NOTE:  Toutes les dimensions "A", "C", et "F" sont à partir du diamètre in

l'entrée du conduit. 

BACKWALL/SIDEWA

MUR ARRIÈRE/MUR DE

CORNER INSTALLATIO
INSTALLATION DU CO

CONDUIT DU MUR SIMPLE

CONDUIT DU MUR SIMPLE

C

ONDUIT DU MUR DOUBLE

CONDUIT DU MUR DOUBLE

INSTALLATION: FULL VERTICAL / ENTIÈREMENT VERTICALE 

 

INSTALLATION: HORIZONTAL WITH MINIMUM 2 FT VERTICAL OFF STOVE TOP
INSTALLATION: HORIZONTALE AVEC 609mm VERTICAL MINIMUM DU HAUT DU POÊLE

DO NOT REMOVE THIS LABEL / NE PAS ENLEVER L'ÉTIQUETTE

Made in U.S.A./Fait Aux États-Unis

*Au Canada doit conformer a CAN/ULC-S629-M87 la norme pour 650 degré C c
bâtit en usine. 

Fabriqué par:

007017

TESTED TO:/ TESTÉ À:

   UL 1482,  ULC S627

-

00. 

A

B

C

D

INSTALLATION:  90

ELBOW OFF TOP OF STOVE THROUGH BACKWALL

INSTALLATION:  90

DU COURBURE AU DESSUS DE HAUT DU POÊLE A TRAVERS LE MUR ARRIERE

Test Lab and 
Report Number

Model Name

Serial Number

Manufacturer Date

SAMPLE

Summary of Contents for Ecochoice ECO-ADV-WS22

















































Reviews: