Heat Trap Hybrid Heat Pump Installation & O
3.
Important Installation notes
3.1.
Local Standards - The following standards and regulatio
into account when planning the installation of the Heat Trap Solar Hybrid Heat
Pump System.
•
AS/NZS 3500.4 National plumbing and drainage code hot water supply systems
solutions.
•
HB 263-2004 heated water systems plumbing industry commission
•
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wirin
•
Any local regulations that govern this type of installation.
Where these instructions and any local regulations are in conflict, the local regulations
3.2.
Safety
No aspect of the installation shall commence
This installation should only be performed by an
licenses, authorised by Heat Trap Solar to conduct the work.
It is imperative that installers adhere to Occupational Health and Safety Gui
installer is responsible for their
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
This system delivers hot water which may exceed
and/or local regulations relating to
3.3.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
The Victorian Building Act 1993 requires that this
by a licensed person. Only a licensed person will provide a Compliance Certificate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
their workmanship for six years.
The Heat Trap installation kit meets the relevant Australian Standards as per AS1432, NZS3501 or as
outlined in AS/NZS 3500.4
Heat Trap Hybrid Heat Pump Installation & O
Important Installation notes
The following standards and regulations should be taken
into account when planning the installation of the Heat Trap Solar Hybrid Heat
National plumbing and drainage code hot water supply systems
2004 heated water systems plumbing industry commission.
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wirin
Any local regulations that govern this type of installation.
Where these instructions and any local regulations are in conflict, the local regulations
shall commence until all safety issues have been addressed.
n should only be performed by an approved professional with suitable experience and
authorised by Heat Trap Solar to conduct the work.
It is imperative that installers adhere to Occupational Health and Safety Guidelines at all times. The
installer is responsible for their own safety and the safety of those around them.
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
is system delivers hot water which may exceed 50
°
C. Reference should be made to AS/NZS3500
and/or local regulations relating to the need for tempering devices to prevent scalding.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
The Victorian Building Act 1993 requires that this Heat Pump Water Heater System must be installed
by a licensed person. Only a licensed person will provide a Compliance Certificate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
workmanship for six years.
meets the relevant Australian Standards as per AS1432, NZS3501 or as
Heat Trap Hybrid Heat Pump Installation & Operating Instructions
10
ns should be taken
into account when planning the installation of the Heat Trap Solar Hybrid Heat
National plumbing and drainage code hot water supply systems – acceptable
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wiring rules).
Where these instructions and any local regulations are in conflict, the local regulations shall prevail.
been addressed.
with suitable experience and
delines at all times. The
safety and the safety of those around them.
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
ference should be made to AS/NZS3500
the need for tempering devices to prevent scalding.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
Heat Pump Water Heater System must be installed
by a licensed person. Only a licensed person will provide a Compliance Certificate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
meets the relevant Australian Standards as per AS1432, NZS3501 or as
