40
Placing the Ember Material
Ember material is shipped with this gas fireplace.
The bag labeled Glowing Ember (050-721) is
standard glowing ember material. To place the ember
material:
DO NOT PLACE
EMBER MATERIAL
HERE
Figure 34. Placement of the Ember Material
CAUTION
IT IS STRONGLY RECOMMENDED THAT TRIM
DOORS WITH OPTIONAL MESH SCREENS BE
INSTALLED ON PROPANE MODELS.
Figure 33. Glass Assembly
• Remove latches
and tension
springs around the
glass door.
• Remove the glass
door from the unit
(Figure 33).
• Place small pieces of ember material on burner
top (Figure 34). Do NOT press embers into burner
ports. Cover the top of the burner with a single
layer of ember material. Then sprinkle GE-93 on
top of the burner. Do NOT place embers on the
ports as noted in Figure 34.
• Save the remaining ember materials for use dur-
ing fireplace servicing.
• Replace the glass
door and a front trim
door on the unit (see
Replacement Parts
Section of the
manual.)
• Replace the latches
and tension springs.
LATCHES
(BOTH TOP
AND BOTTOM)
GLASS
ASSEMBLY