49
Heat & Glo • CERONA-36-IFT, CERONA-42-IFT Installation Manual • 2558-980 Rev. C • 3/21
STEP 4.
LOG #4 (SRV2107-704):
Place the left formed end of log #4 on the burner detail
located under log #3, and the notch on the right end of log
#4 on the front grate bar. Log #3 may need to be adjusted
for proper placement. See Figure 5.
44
NOTCH FITS OVER FRONT GRATE BAR
NOTCH FITS OVER FRONT GRATE BAR
NOTCH FITS
NOTCH FITS
ON BURNER
ON BURNER
DETAIL
DETAIL
Figure 5.
STEP 5.
LOG #5 (SRV2107-705):
Place log #5 on the left side between the grate tine and
firebox.
Note:
This log will be used to support log #6. See
Figure 6.
55
Figure 6.
STEP 6.
LOG #6 (SRV2107-706):
Place notch of log #6 over the left grate tine. Log should rest on
the flat of log #5 and the flat on log #3. You may need to reposi
-
tion log #5 to get log #6 to sit in the flats. See Figure 7.
Figure 7
66
2107-935C
