Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. Q • 11/11
19
Figure 3.5 Valve Assembly Removal
NOTCH LOCATION
NG LP
6000C
6000CL
6000CLX
6000CBV
8000C
8000CL
8000CLX
8000CBV
Figure 3.6 Burner Identifi cation
D. Burner Identifi cation/Verifi cation
The burner may be accessed for identifi cation and verifi cation purposes. This task should be performed by a qualifi ed ser-
vice technician. The base refractory, valve plate and grate do not need to be removed to access the burner assembly. The
logs and fi ber burner top need to be removed to access the burner. Disconnect the pilot from the burner before removal.
See Figure 3.6 for burner identifi cation chart. Notch patterns are located on bottom side of burner.
